GI 44-45 Living History Group
Would you like to react to this message? Create an account in a few clicks or log in to continue.

[REF] M7 Grenade Launchers

Go down

[REF] M7 Grenade Launchers Empty [REF] M7 Grenade Launchers

Post  Les Brock Sat Apr 18, 2009 8:28 pm

M7 Grenade Launchers

Below is a very brief description of each launcher :



M7 Grenade Launcher :

WWII design, long stud for opening gas cylinder lock screw to vent gas pressure preventing damage to rifle. Semi automatic fire with launcher attached not possible due to long stud. Early version had steel retainer and nut for retaining projectile. Later version had circular coil spring. Packed with an early, vented, lock screw, which replaced the solid lock screw. This vented lock screw did not automatically close, which created problems in the field. More M7’s were made than any other model.

[REF] M7 Grenade Launchers Abt10

[REF] M7 Grenade Launchers Abu10


M7A1 Grenade Launcher :

Solved the problem of the M7’s long stud. This version had a shortened stud and a provision for recoil. Upon launching a heavy projectile the launcher recoiled rearward, opening the lock screw’s valve. Had circular coil retaining spring. Standardized in July 1945, ordnance records show it was issued with a “hardened” lock.

[REF] M7 Grenade Launchers M7a110





M7A2 Grenade Launcher:

Solved the problem of the M7A1’s violent recoil and the damage it did to lock screw valves.The high hump lock was packed with the M7A2 launcher and was also part of the production of rifles during the Korean War.The lock’s hump mated up with a corresponding surface on the launcher, which limited rearward movement during recoil. This limit prevented damage to the lock screw’s valve It had the circular coil spring and was the model, which transitioned to the “hairpin” type projectile retainer; thus two types were used on this launcher. Standardized 1952.


[REF] M7 Grenade Launchers M7a210


M7A3 Grenade Launcher:

Identical to the M7A2 except a few inches longer. The additional length helped stabilize the heavier anti tank rifle grenades being adopted due to development of heavier armor. Standardized circa Jan 1953, packed with the high hump lock and the flat edge lock, depending upon contractor. Only version known to utilize the “drop leaf” sight, mounted on the launcher.

[REF] M7 Grenade Launchers M7a310

Sight

[REF] M7 Grenade Launchers Sight-10

[REF] M7 Grenade Launchers Abq10
Les Brock
Les Brock

Posts : 506
Points : 286
Reputation : 2
Join date : 2008-05-12
Age : 59
Location : In the Doghouse

Back to top Go down

[REF] M7 Grenade Launchers Empty Re: [REF] M7 Grenade Launchers

Post  Guest Sun Apr 19, 2009 2:10 pm

Thanks for posting another good Article, Les. I wonder whether or not you'd be willing to prepare a similar Article detailing the numerous other Grenade Launchers (M1, M2 and M8 )? It might also be worth pointing out that these items are classed Section V Firearms, though!

Cheers,
Ben

Guest
Guest


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum